Shotcrete or Gunite – Which Material is better for Concrete Pool
Best Concrete Placing Boom
Shotcrete Placing Boom Technology: How to Eliminate Rebound Problems
February 17, 2020
Shotcrete Machine
Shotcrete Measurement and Benefits During Application
May 21, 2020
Show all

Shotcrete or Gunite – Which Material is better for Concrete Pool

concrete placing boom

Concrete pools prepared through a shotcrete Machine Supplier are frequently alluded to as “gunite” pools. However, then what’s shotcrete? Are gunite, shotcrete, and concrete have no difference at all? Not to stress… all will be uncovered.

Concrete is a mix of water, cement, sand, and a coarse aggregate, which is usually stone or gravel. The concrete, sand, and aggregate are the underlying mixture. How the manufacturer blends in the water decides how we refer to it.

In technical terms, the word shotcrete refers to either dry or wet mix concrete as long as it’s shot out of a hose. However, in the world of construction, we take matters into our own hands. In this case, the matters of terminologies.

For our objectives, shotcrete is the wet blend concrete. The entire concrete sand-aggregate mix is as of now blended with water when it shows up at your lawn in the monstrous cement truck.

Gunite is a concrete applied with the dry-blend process, as it is without water, until the concrete placing boom manufacturer really applies it.

Difference between shotcrete and gunite for a concrete pool

Concrete pools can be made of either shotcrete or gunite. The thing that matters is the point at which the concrete mixes with the water. Shotcrete alludes to wet concrete that is, as of now, completely blended before it’s shot out of a hose.

Gunite is a dry concrete blend that possibly blends in with water at the nozzle when it’s sprayed.

Construction of Concrete Pool

The process of constructing shotcrete and gunite are almost the same:

  • Measure and excavate the ground.
  • Install the plumbing.
  • Install a reinforced cage of tied steel rebar
  • Spray concrete―using either the gunite or shotcrete process ― encasing the rebar.
  • Install Tile and Coping
  • Install the patio.
  • Shape and finish the concrete pool shell.
  • Let the concrete cure.
  • Startup the pool.
  • Apply the finish (plaster, aggregate, or tile).

Application of Gunite

1 – For gunite, the manufacturers load the pre-blended dry material into the container of the delivery gear.

2 – They utilize compacted air to send the material to the nozzle, where it blends-in with water.

3 – At that point, it sprays out at too high velocity, which compacts the material on placement.

Application of Shotcrete

1 – For shotcrete, the manufacturers put the completely blended wet concrete in gear hopper and compacted air shoots the material to/through the nozzle.

2 – Once more, the material splashes out quickly and compresses where applied.

 

Leave a Reply

Your email address will not be published. Required fields are marked *